Calibration Technician

Job Description:

Description:OCCUPATIONAL SUMMARY
This classification requires the performance of precise calibration measurements and repair functions on electrical/ electronic/ physical/ mechanical type reference and secondary standards, and related equipment. Maintain these standards and equipment to the requirements necessary for achieving traceability to the National Institute of Standards and Technology (NIST), the United States Navy, or other recognized national metrology institutes. Work is performed where standards, procedures, and sequences have been determined. Perform varied work assignments within the Metrology Organization to acquire the knowledge, skill, and ability required to perform the duties of a qualified Calibration Technician Senior.

WORK PERFORMED
Work in Metrology functions with technical assistance and guidance or work independently with complete procedures or written instruction after initial on-the-job instruction and guidance. Work with progressively less guidance and instruction as knowledge, skill, and experience in classification increases.

Perform inspection to determine that equipment to be calibrated is in suitable condition for calibration and use. Troubleshoot and make minor repairs and adjustments needed to accomplish calibration.

Perform calibration tasks in the laboratory on electrical/ electronic/ physical/ mechanical Test Measurement and Diagnostic Equipment (TMDE) such as, but not limited to: AC/DC voltage, AC/DC current, resistance, capacitance, inductance, power, phase, frequency, microwave, electronic voltmeters, oscilloscopes, signal generators, multi-meters, power supplies, frequency and event counters, digital voltmeters, test sets, pressure, vacuum, liquid and gas flow, mass, length, optical, temperature, humidity, torque, force, vibration, and tachometry calibrations.

Monitor the performance of the laboratory standards in use, and may assist in troubleshooting and repair of laboratory standards.

Use procedures, data sheets, or manufacturers’ manuals and specifications in the performance of calibration.
Collect data for trend charts and check standards.
Participate in government and commercial audits and assessments.
Basic Qualifications:
Possess technical knowledge in the field of electrical/ physical sciences equivalent to completion of two years of courses in metrology, or other related subjects, or successful completion of the basic DoD Calibration School, or an Associate of Science degree in engineering technology.

Must be able to routinely climb stairs and ladders.

Must be able to lift 45 lbs.

Ability to qualify for and maintain certifications/ qualifications and/or licenses to perform assigned duties.

Possess mechanical aptitude and the ability to use general purpose hand tools.

Skilled in the use of computers and ability to learn new computer applications.

Ability to function successfully in a team environment.

Excellent communication skills.

Excellent computer skills in the Windows environment.

Ability to obtain and maintain a secret security clearance.

No dual citizenship.
Desired Skills:
Experience performing calibrations in an ISO 17025 accredited calibration laboratory.

Calibration experience with: Frequency, Microwave, Precision AC/DC, Fiber Optics, Temperature, Humidity, Torque, Force, Dimensional, Optics, Mass, Pressure, Flow, or Gas.

Active security clearance
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: Standard Monday to Friday 40 hour work week
The base range for this position in Washington, District of Columbia is $33.53 - $46.59.
Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. The wage range and benefits summary is a general guideline and is governed by the applicable collective bargaining agreement when extending an offer.
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the worlds most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.

With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.

If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: SPACE
Relocation Available: No
Career Area: Technicians
Type: Full-Time
Shift: First

Experience performing calibrations in an ISO 17025 accredited calibration laboratory.

Calibration experience with: Frequency, Microwave, Precision AC/DC, Fiber Optics, Temperature, Humidity, Torque, Force, Dimensional, Optics, Mass, Pressure, Flow, or Gas.

Active security clearance

Job Ident #: 72963588304

Company Details

Lockheed Martin

6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/

Lockheed Martin Corporation is an American global aerospace, defense, security and advanced technologies company with worldwide interests. It was formed by the merger of Lockheed Corporation with Martin Marietta in March 1995. It is headquartered in North...

Benefits:
TBD

(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)

Job Info

Location

Silverdale, Washington, United States

Type

Permanent

Company Details

Lockheed Martin

6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/