Job Description:

This position is located at the William J. Hughes Technical Center, Aviation Research Division, Software & Systems Branch, System Safety Section, ANG-E272.

Duties

Serves as an engineer within the Federal Aviation Administration. In this capacity, directly participates in and is responsible for planning, developing, reviewing, and evaluating major aviation safety research initiatives. Uses professional engineering principles on a wide variety of research efforts that lead to a safe, efficient, and cost-effective National Airspace System (NAS) through the research & development of innovative aviation technologies.

Develops and implements independent and interdependent engineering studies to resolve issues and/or identify problems. Analyzes, tests and evaluates operational and technical information; identifies, mitigates or resolves current or potential problems with systems. Evaluates existing/proposed policies, standards, requirements, and objectives for efficient performance of programs and systems. Evaluates state-of-the-art technology, aerospace engineering concepts, and potentially useful tests and evaluations internal and external to FAA. Analyzes trends, developments, and performance data. Determines compatibility with established/planned systems and their desirability and effectiveness. Identifies requirements for new or modified standards, objectives, policies, or system modifications.

Submits fully documented recommendations for systems acquisition, approval, and/or modification to supervisor. Functions as Contracting Officers Representative (COR) during the acquisition and procurement cycle. Participates in a team that reviews contractor proposals for adequacy of design, and for operation, maintenance, and implementation procedures. Conducts feasibility, cost-benefit, and other studies for technical and fiscal adequacy. Submits evaluations and recommendations to Contracting Officer.

Participates and contributes to an interdisciplinary team of technical experts to develop, test, evaluate, and/or implement aircraft systems and/or components that impact the NAS. Represents the organizational unit at various seminar, committee, user group panel, and conference meetings at intraagency, interagency, aviation industry, and national levels.

Coordinates and provides technical guidance to managers and sponsors. Identifies existing or potential problems. Assists in defining requirements, proposes alternatives, and coordinates solutions with sponsors. Provides periodic status reports to supervisors. Identifies existing/potential problems which may impact on established or proposed plans, identifies alternatives, and provides recommendations. Conducts administrative or on-site comprehensive reviews of existing or proposed projects; verifies cost estimates with managers throughout the FAA. Identifies questionable parts of proposals or procedures. Develops funding documents and/or schedules and milestones.

Performs multiple, varying, and complex assignments under the limited direction of a manager, project/program manager, team leader, or more experienced engineer. Acts as a contributing specialist on large work activities or as a team leader for single or small work activities.

Provides guidance to lower-level staff to solve difficult technical issues. Resolves all but unique technical problems without the intervention of management or a more experienced engineer. Identifies and informs management of problems that require their attention. Often develops and recommends techniques to address problem situations.

Defines, plans, and organizes assigned resources to accomplish organizational objectives. Allocates resources to accomplish small work activities within established schedules.

Job Requirements:

Requirements Conditions of Employment

US Citizenship is required.
Selective Service Registration is required for males born after 12/31/1959.
Must submit an SF50 (See Required Documents).
This position has a positive education requirement. Transcript(s) required.

Qualifications

To view the complete OPM qualification standard for the Group Coverage Qualification Standard for General Engineer 0801, please refer to:

General Engineering Series 0801

Basic Requirements:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

To qualify for this position you must demonstrate in your application that you possess at least one year of specialized experience equivalent to FV-H, FG/GS 11/12. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position.

Experience includes: Experience conducting technical research to develop, test, and implement state-of-the-art technology, engineering concepts, and tests and evaluations for the safety of aviation systems and/or components.

Qualifications must be met by the closing date of this vacancy announcement.

Education

This position has a positive education requirement: Applicants must submit a copy of their college or university transcripts(s) and certificates by the closing date of announcement to verify qualifications. If selected, an official transcript will be required prior to appointment. You may upload these documents with your application in USAJOBS or fax it to fax number provided in the announcement (please include announcement number on each page).

Failure to do so will result in loss of consideration.

Schools must be accredited by an accrediting institution recognized by the U.S. Department of Education. Accreditation may be verified at the following website: www.ed.gov/accreditation.

Foreign education must be evaluated by a private professional organization specializing in interpretation of foreign education credentials or an accredited U.S. educational institution in terms of equivalence to a degree acquired at an American college or university. A copy of the evaluation results must be included, otherwise your foreign education will not be considered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

IMPORTANT: Applicants may be rated on the extent and quality of experience, education, and training relevant to the duties of the position(s). All answers provided in the on-line process must be substantiated. Ensure that your application package/resume supports your responses.

Required Documents

Only supplemental documentation, e.g. transcripts or veteran's documentation will be accepted in combination with your on-line application. These documents must be uploaded or emailed to Danielle.C.Long@faa.gov on or before the closing date of this announcement. All submitted documents should reference the announcement number.

Applicants claiming eligibility for the Expanded Veterans Hiring Opportunity (EVHO), MUST submit a DD Form 214 reflecting character of service to verify eligibility by the closing date of the announcement as requested by the Human Resource Office. Eligibility for EVHO will be considered based on applicable documentation submitted by the closing date.
This position has a positive education requirement; college transcripts are required for ALL candidates newly appointed to the FAA in the 0800 (Engineering) series.

College transcripts must be submitted from current FAA employees applying for internal vacancies if they have never held a position in the 0800 (Engineering) series with the FAA.

College transcripts are not required from current FAA employees who are currently occupying an 0800 (Engineering) series.

If selected, official transcripts are required prior to employment.

If you are a current or former Federal employee (including a current FAA employee), you MUST provide a copy of your SF-50 (Notification of Personnel Action) containing information in Blocks 15, 17, 18, 19, 22, and 24 so it can be used to verify your position title, series, grade, tenure, and organization of record by the closing date of the announcement. You may fax your SF-50 or upload it into the on-line application. If faxing the SF-50, please ensure you include the vacancy announcement number on the faxed copy.

If you are a current Federal employee and need a current copy of your SF-50, please contact your personnel office. If you are an FAA employee, you can access and print your SF-50 from the eOPF system https://eopf.opm.gov/dot/. If you are a former Federal employee, you can obtain a copy of your SF-50 by writing the National Personnel Records Center Annex, 1411 Boulder Boulevard, Valmeyer, IL 62295. Additional information is available from this link: https://www.archives.gov/st-louis/opf.

Expanded Veterans Hiring Opportunity (EVHO) are preference eligibles and veterans who are honorably discharged from the Armed Forces after completing at least three (3) years of continuous active service. Applicants claiming eligibility for EVHO, MUST submit a DD Form 214 reflecting character of service to verify eligibility by the closing date of the announcement as requested by the Human Resource Office. Eligibility for EVHO will be considered based on applicable documentation submitted by the closing date.

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

Job Ident #: 820901500

Apply Now

(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)